If your $3,000 budget is for the DTF printer alone, the Xinflying 400D and 702E are the two models to compare. Choose the compact 30 cm-wide 400D for A3-width work and limited floor space. Consider the 60 cm-wide 702E when wider transfers and higher published throughput matter more than a compact footprint. Xinflying has identified both as printer-only options within this budget; the final price depends on the quoted configuration. Request a current written quote before treating either model as a fixed-price purchase.
A printer-only budget does not include everything needed to produce finished DTF transfers. Plan separately for film, ink, hot-melt powder, powder application and curing, a heat press, ventilation, shipping, and any applicable taxes.
400D vs. 702E at a Glance
| Buying question | Xinflying 400D | Xinflying 702E |
|---|---|---|
| Published print width | 30 cm | 60 cm |
| Published printheads | Two i1600-A1 or XP600 heads; confirm the quoted configuration | Two Epson i3200-A1 heads |
| Published print speed | Standard: 2.5 m²/h at 6 pass; 1.5 m²/h at 8 pass | 10 m²/h at 6 pass; 8 m²/h at 8 pass; 5 m²/h at 12 pass |
| Published printer footprint | 95 × 60 cm on the product page; 96 × 77 cm for the catalog high-tripod version | 170 × 85 cm |
| White-ink circulation | Standard, as confirmed by Xinflying | Built-in feature listed on the product page |
| Better fit | Smaller transfers, shorter runs, limited space | Wider graphics and a shop planning for more throughput |
These are manufacturer specifications, not a side-by-side production test. Speed depends on pass mode and does not equal finished-transfer output after loading, powdering, curing, and maintenance. The 400D product page gives two different machine heights, while the July 2026 catalog lists a high-tripod version measuring 96 × 77 × 122 cm. Request the dimension sheet for the exact quoted configuration before planning the installation.
Choose the 400D for A3-Width Work and a Smaller Footprint
The 400D has a published 30 cm print width, which is slightly wider than the 29.7 cm short edge of A3 paper. That makes it a reasonable starting point for many A3-width graphics and smaller apparel transfers. Do not assume every edge-to-edge A3 design will fit: confirm the usable image width, margins, film width, and RIP settings for your artwork.
The product page lists a 95 × 60 cm footprint, while the catalog high-tripod version measures 96 × 77 cm. Either is smaller than the 702E, but use the dimensions of the actual quoted configuration. The product page lists two possible printhead types, so the quote must identify which one is included. It also lists standard and fastest speeds separately; use the standard-speed figures when planning ordinary production, and ask for a sample run using your own artwork and chosen quality setting.
Xinflying confirms that white-ink circulation is standard on the 400D, although the linked product page does not state it explicitly. Circulation helps keep white ink moving; it does not replace nozzle checks, cleaning, or the model maintenance schedule. Ask for the operating instructions with the quoted unit.
The 400D is the stronger shortlist choice when: most orders fit its usable print width, space is limited, and a smaller initial production setup matters more than 60 cm capacity.
Choose the 702E When Width and Throughput Matter More
The 702E provides a published 60 cm print width and two Epson i3200-A1 printheads. Its product page lists 10 m²/h at 6 pass, 8 m²/h at 8 pass, and 5 m²/h at 12 pass. Those figures make it more suitable for wider artwork or multiple designs arranged across a roll, provided your finishing equipment and order volume can use the extra print capacity.
The 702E page explicitly lists built-in white-ink circulation. Circulation helps keep white ink moving; it does not remove the need for nozzle checks, cleaning, or the model’s maintenance schedule. Ask what the circulation system does during printing, idle periods, and shutdown, and request the operating instructions for your configuration.
Its published machine dimensions are 170 × 85 × 135 cm. Allow additional room for film handling, access, ventilation, and the rest of the transfer workflow. Measure the complete installation area before ordering.
The 702E is the stronger shortlist choice when: you need designs wider than the 400D can print, expect enough work to use its capacity, and have space for a larger production line.
Two Complete Transfer-Line Options
A DTF printer produces the image on PET film. A matching powder shaker and dryer applies hot-melt powder, cures the transfer, and collects the film. Xinflying’s July 2026 product catalog identifies two pairings: XF-400D + XF-400H for 30 cm media and XF-702E + XF-Z650-2 for 60 cm media. A heat press is still needed to apply the finished transfer to a garment. Neither pairing has a verified fixed bundle price in this guide.
Compact 30 cm line: 400D + 400H
The catalog pairs the 400D with the 30 cm XF-400H powder shaker and dryer. The 400H lists powder dusting and shaking controls, infrared-lamp heating, a mesh-belt conveyor, and automatic take-up. The July 2026 catalog lists a 113 × 64 × 90 cm machine with 1.2 kW power for its example configuration. The paired 400D high-tripod version is listed at 96 × 77 × 122 cm and 0.5 kW. Xinflying can customize 110 V or 220 V electrical configurations and power ratings to buyer requirements, so use the specifications of the quoted units when planning space and electrical supply. The installation also needs room for film travel, service access, ventilation, and heat pressing.
This is the more relevant complete-line quote to request if the 400D’s usable width covers your orders. Confirm that the exact printer and 400H versions can be connected and operated together, along with the included stand, software, accessories, and U.S. electrical configuration.
60 cm line: 702E + Z650-2
Xinflying’s XF-702E + Z650-2 Alibaba storefront category and product catalog show a 60 cm printer paired with a nominal 60 cm Z650-2 powder shaker and dryer. The Z650-2 lists powder-control functions, quartz-lamp drying and curing, a mesh-belt conveyor, and automatic take-up. The July 2026 catalog lists a 175 × 100 × 105 cm Z650-2 with 4.7 kW power for its example configuration. The 702E printer is listed at 170 × 85 × 135 cm and 0.8 kW. The ordered voltage and power configuration may differ.
Allow room for both machines, film travel, exhaust, service access, and a separate heat-press station. The catalog and current Z650-2 product page give different electrical-current figures. Xinflying confirms that voltage and power can be customized, including 110 V and 220 V configurations; the published figures should therefore not be used as a universal circuit requirement. Obtain the final nameplate and electrical specification for the exact ordered units, then have the site supply reviewed before installation. Confirm usable film width and the mechanical handoff between printer and shaker.
The $3,000 limit still applies only to the printer. Alibaba’s category contains broad listing ranges across different configurations and bundles, not a fixed price for either complete line. Request an itemized quote for the printer, shaker and dryer, printheads, RIP license, accessories, U.S. shipping, installation, and support.
Is Either Printer Suitable for an Apartment?
The published product pages do not provide measured operating noise, curing-equipment noise, or a complete residential installation specification. Do not treat the 400D’s smaller footprint as proof that an apartment is a suitable DTF workspace.
A finished transfer requires powder application, curing, and heat pressing in addition to printing. Before planning residential use, confirm the full equipment dimensions, electrical requirements, ventilation design, powder and ink safety documentation, building rules, and noise at the intended operating settings. Ask Xinflying for measured sound levels if noise is a deciding factor; an unverified description such as “quiet” is not enough.
For a small commercial studio, compare the space needed for the entire workflow, not just the printer cabinet. The catalog shows 1.2 kW for one 400H configuration and 4.7 kW for one Z650-2 configuration; customized units can differ. Include the printer and other equipment when checking the final site load. For an apartment, obtain a site-specific assessment before buying equipment.
What Does the $3,000 Budget Actually Cover?
For this guide, under $3,000 means the printer unit only. Xinflying has identified the 400D and 702E as eligible candidates, but its public product pages ask visitors to request a quote rather than showing a fixed checkout price. The company’s Alibaba International storefront category for the XF-702E and Z650-2 displays listing ranges such as $869–$3,399 and $899–$4,799. Several listings include a powder shaker or dryer, so these ranges cannot establish the price of a specific 702E printer-only configuration. A written quote should state the exact model, printheads, included RIP software, power configuration, package contents, and printer-unit price.
Budget separately for:
- compatible PET film, DTF ink, and hot-melt powder;
- a powdering and curing method matched to your output;
- a heat press and transfer supplies;
- ventilation and any required environmental controls;
- shipping, duties, taxes, installation, and training, if applicable; and
- replacement consumables and routine maintenance.
A lower printer quote can become the more expensive choice if it omits required components or support. Compare what is included, not only the headline price.
What to Confirm Before Requesting a Quote
Send Xinflying your largest artwork width, expected weekly transfer volume, available floor space, U.S. power supply, and whether you already own curing and heat-press equipment. Request written answers to these questions:
- Which 400D printhead option is included, and what are the operating and maintenance instructions for its standard white-ink circulation system?
- What are the usable image width, supported film width, and verified machine dimensions?
- Which RIP license, ink set, accessories, installation help, and training are included?
- Which powdering and curing equipment is recommended for the expected volume?
- What are the electrical, ventilation, noise, and maintenance requirements for the 400D + 400H or 702E + Z650-2 setup?
- What is the printer-only price for the exact configuration, and what do shipping, taxes, warranty, and U.S. support add?
Choose the 400D if its usable width covers your orders and space is your main constraint. Choose the 702E if 60 cm width and higher published throughput solve a real production need. If neither fits the full setup or workspace, revise the installation plan before buying.
Request a configuration-specific quote from Xinflying and include your artwork size, volume, workspace, and printer-only budget.
Frequently Asked Questions
The 400D and 702E can fit a printer-only budget below $3,000 based on the pricing guidance used for this article. The public product pages do not show fixed prices. Confirm the current U.S. quote and the included printhead, software, accessories, shipping, and taxes before ordering.
Its published print width is 30 cm, slightly wider than A3’s 29.7 cm short edge. Confirm the usable image width and margins before promising a full A3 design, particularly one that must print edge to edge.
No. Xinflying confirms that white-ink circulation is standard on the 400D, and the 702E product page lists a built-in circulation system. Operators still need to follow the nozzle-check, cleaning, and standby instructions for their model. Ask for the current maintenance schedule with your quote.
The F808 is an 80 cm, eight-printhead industrial model. Xinflying identified the 400D and 702E, not the F808, as the options for this printer-only budget. The F808 belongs in a separate industrial-capacity comparison.
Need a Different DTF Printer Configuration?
If neither the 400D nor the 702E fits your print width, production volume, or workspace, explore the full Xinflying DTF printer range. Compare other models, then request a quote for a configuration matched to your artwork size and expected output.
