{"id":15679,"date":"2026-11-10T18:00:00","date_gmt":"2026-11-10T10:00:00","guid":{"rendered":"https:\/\/www.xin-flying.com\/?p=15679"},"modified":"2026-11-10T13:48:18","modified_gmt":"2026-11-10T05:48:18","slug":"comment-realiser-des-autocollants-3d-uv-dtf","status":"publish","type":"post","link":"https:\/\/www.xin-flying.com\/fr\/how-to-make-3d-uv-dtf-stickers\/","title":{"rendered":"Comment r\u00e9aliser des autocollants 3D UV DTF : calques, processus de travail et contr\u00f4les des \u00e9chantillons"},"content":{"rendered":"<p class=\"wp-block-paragraph\">To make a hard-surface 3D UV DTF sticker, print white ink, CMYK color, and clear UV varnish onto adhesive Film A, cure the ink with UV light during printing, laminate transfer Film B on top, and press the decal onto a clean rigid item. The raised feel on a standard UV DTF decal comes from the cured ink stack and the glossy varnish coat, not from a vinyl backing sheet.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Before setting up a print job or buying equipment, check what kind of &#8220;3D&#8221; your order actually requires. Suppliers use the same phrase for slightly raised glossy tumbler decals, thick direct-to-object UV embossing, and heat-pressed 3D apparel badges. Each of those uses a different ink behavior, film or platen setup, and transfer method.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">First Clarify What &#8220;3D UV DTF Sticker&#8221; Means for Your Order<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>&#8220;3D UV DTF&#8221; is not a single standardized process.<\/strong> In online guides and product listings, the label covers four different production setups. Mixing them up leads shops to buy the wrong film, expect millimeter-tall relief on a curved cup wrap, or apply a rigid decal to a shirt.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Match the customer&#8217;s sample or reference photo against the complete production system\u2014ink, film, adhesive, transfer method, and target surface\u2014using the table below.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>What people call &#8220;3D UV DTF&#8221;<\/th><th>Ink and layer build<\/th><th>Film or platform<\/th><th>How it transfers<\/th><th>Target surface<\/th><\/tr><\/thead><tbody><tr><td><strong>Standard raised-varnish UV DTF decal (crystal label)<\/strong><\/td><td>UV-curable white underbase, CMYK color, and clear varnish for gloss and light tactile relief<\/td><td>UV DTF Film A (print side) laminated with Film B (carrier)<\/td><td>Cold pressure by hand or squeegee; peel carrier<\/td><td>Smooth hard goods: glass, metal, ceramic, acrylic, rigid plastic<\/td><\/tr><tr><td><strong>Direct-to-object UV relief \/ embossing<\/strong><\/td><td>Repeated UV ink passes built directly on the item<\/td><td>Flatbed or rotary jig holding the object (no transfer film)<\/td><td>Not transferred; printed straight onto the product<\/td><td>Flat plaques, phone cases, magnets, coasters, cylinders<\/td><\/tr><tr><td><strong>Flexible 3D raised apparel badge \/ faux embroidery<\/strong><\/td><td>High-build flexible white ink stacked for height, plus flexible CMYK and finish coat<\/td><td>Special textile transfer film and TPU hot-melt adhesive system<\/td><td>Contour cut and applied with a heat press<\/td><td>Apparel and fabric goods: hoodies, jerseys, caps, canvas bags<\/td><\/tr><tr><td><strong>Marketing name on standard transfer stickers<\/strong><\/td><td>Standard CMYK + white + varnish UV DTF print<\/td><td>Standard A\/B film<\/td><td>Cold pressure and peel<\/td><td>Hard surfaces; &#8220;3D&#8221; simply describes the no-background, slightly raised look<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">This guide focuses on the first category: <strong>hard-surface UV DTF decals made with A\/B film.<\/strong> For a broader overview of the base technology, see our guide on <a href=\"https:\/\/www.xin-flying.com\/what-is-uv-dtf-printing\/\">what UV DTF printing is<\/a>. If your customer wants flexible transfers for shirts or hoodies, compare the two workflows in <a href=\"https:\/\/www.xin-flying.com\/dtf-vs-uv-dtf-printing\/\">DTF vs. UV DTF printing<\/a>.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">What Gives a Hard-Surface UV DTF Sticker Its Raised Feel?<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>On a hard-surface UV DTF decal, the tactile effect comes from cured UV ink layers topped with clear varnish.<\/strong> Unlike vinyl stickers that sit on a flat PVC sheet, a UV DTF transfer leaves only the cured ink and adhesive on the object. When you run a finger across the finished decal, you feel the step from the bare surface up to the capped ink stack.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Each ink layer has a distinct job in that stack:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>White ink acts as the optical foundation.<\/strong> On clear glass, stainless steel, or dark tumblers, CMYK ink alone looks translucent and dull. The white layer sits behind the color to block the background and keep colors bright.<\/li>\n\n\n\n<li><strong>CMYK ink forms the visible graphic.<\/strong> It prints over the white foundation to produce logos, gradients, text, and illustrations.<\/li>\n\n\n\n<li><strong>Clear UV varnish creates the surface finish and localized relief.<\/strong> Varnish adds a glossy dome-like sheen, protects the color layer from everyday rubbing, and gives selected elements a noticeable tactile edge.<\/li>\n<\/ul>\n\n\n\n<figure class=\"wp-block-image size-large\"><img fetchpriority=\"high\" decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/3d-uv-dtf-sticker-layer-structure-1024x576.webp\" alt=\"Cross-section diagram of a hard-surface 3D UV DTF sticker showing adhesive, white ink, CMYK color, and raised clear varnish layers between Film A and Film B\" class=\"wp-image-15684\" srcset=\"https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/3d-uv-dtf-sticker-layer-structure-1024x576.webp 1024w, https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/3d-uv-dtf-sticker-layer-structure-300x169.webp 300w, https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/3d-uv-dtf-sticker-layer-structure-768x432.webp 768w, https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/3d-uv-dtf-sticker-layer-structure-1536x864.webp 1536w, https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/3d-uv-dtf-sticker-layer-structure-18x10.webp 18w, https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/3d-uv-dtf-sticker-layer-structure.webp 1672w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Why film transfers have practical height limits.<\/strong> In a transfer workflow, the printed A film must pass through lamination with Film B, release cleanly from the A backing, conform to the item, and let the B carrier peel away without tearing the design. If an ink stack is built too thick or cured into a brittle block, the laminator leaves air gaps along the steep side walls. Thick, rigid edges also catch when peeling the carrier and lift off curved cups. Controlled gloss and clean edges matter more on a transfer decal than chasing maximum thickness.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Equipment, Inks, and Films You Need Before Starting<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>A reliable 3D UV DTF workflow requires hardware, software, and consumables that are matched to work together.<\/strong> Check five components before running production:<\/p>\n\n\n\n<ol class=\"wp-block-list\">\n<li><strong>A compatible UV DTF printer or UV printer setup.<\/strong> Dedicated roll-to-roll UV DTF printers feed Film A, print CMYK, white, and varnish, and laminate Film B inline. Compact desktop UV flatbed printers can also print onto Film A sheets or rolls, provided they support white and varnish channels and pair with a separate laminator.<\/li>\n\n\n\n<li><strong>Matched UV inks with white and varnish channels.<\/strong> Confirm whether your printer configuration uses rigid, soft, or ultra-soft UV ink so the cured layer matches your target items and film release. Because white UV ink contains heavy titanium dioxide pigment, the printer needs active white ink circulation or stirring and regular nozzle care. Keep our <a href=\"https:\/\/www.xin-flying.com\/uv-printer-maintenance-checklist\/\">Liste de contr\u00f4le pour l'entretien des imprimantes UV<\/a> by the machine for daily routines.<\/li>\n\n\n\n<li><strong>A\/B transfer film sets.<\/strong> Film A is the adhesive-coated print carrier; Film B is the transfer film that picks up the cured design during lamination. Always verify which side of Film A is the print surface according to the supplier&#8217;s instructions. You can review standard film and ink options on our <a href=\"https:\/\/www.xin-flying.com\/uv-printer-machine\/uv-printer-machine-supplies\/\">UV printer supplies<\/a> page.<\/li>\n\n\n\n<li><strong>RIP software with spot-channel control.<\/strong> Your RIP software (such as RIIN, PrintFactory, Maintop, or PhotoPrint, depending on your printer model) tells the printer where to lay down white ink, color, and varnish. It must let you set white choke and define a dedicated varnish mask.<\/li>\n\n\n\n<li><strong>Lamination and application tools.<\/strong> If your printer does not laminate inline, you need an external laminator to bond Film B to Film A evenly. Keep a felt-edge squeegee, lint-free cloths, and isopropyl alcohol on hand for surface prep and transfer.<\/li>\n<\/ol>\n\n\n\n<h2 class=\"wp-block-heading\">Step-by-Step: How to Make and Apply 3D UV DTF Stickers<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Follow the workflow recommended for your specific printer, RIP software, and A\/B film.<\/strong> Layer order, lamp settings, and laminator heat vary by equipment, so treat the five steps below as the operational structure rather than universal numerical settings.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Step 1: Prepare the Artwork and Spot Channels<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Start with a high-resolution PNG with a transparent background or a vector file (SVG, PDF, EPS, or TIFF, depending on what your RIP accepts) sized to the final print dimensions. Avoid faint semi-transparent shadows around the edges; the RIP may place white ink under those pixels and create a visible halo.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Decide which parts of the graphic should feel raised. You can apply varnish across the entire decal for a uniform glossy seal, or create a separate spot-varnish channel in your design software so only specific letters, borders, or icons get the raised highlight. Keep tiny isolated text and razor-thin lines separate from heavy relief zones so they remain easy to peel.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Step 2: Set White Choke and Varnish Layers in the RIP<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Import the file into your RIP software and generate the white underbase and varnish channels. Apply a slight <strong>white choke<\/strong> (contracting the white mask inward by a small margin relative to the CMYK edge) so white ink does not peek out around dark outlines.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Select the print mode and pass setting supported for your ink and film combination. Higher pass counts and multi-layer varnish profiles deposit more varnish for a stronger tactile feel, but they also increase print time and require stable registration across every pass.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Step 3: Load Film A and Print With UV Curing<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Run a nozzle check before starting the batch. A few missing white or varnish nozzles will leave streaks or uneven texture in a raised print.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Place Film A on the printer bed or roll feeder, removing the protective top liner if your film uses one. Keep the film flat so the printheads maintain an even gap and do not strike the media. As the printer lays down white, CMYK, and varnish, the onboard UV-LED lamp cures the ink into a solid, tack-free structure on the adhesive surface of Film A.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Step 4: Laminate Film B onto Film A<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">On an all-in-one roll-to-roll UV DTF printer, the machine presses Film B onto the printed Film A automatically as the roll advances. On a sheet or desktop setup, feed the printed Film A and Film B into your laminator with the printed side facing the transfer side of Film B.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Use the pressure and temperature settings specified for your A\/B film so Film B bonds around the raised varnish edges without trapping air bubbles. Once laminated, cut the sheet or roll into individual decals; you do not need to contour-cut or weed around individual letters. For full-wrap drinkware layouts, see our guide on <a href=\"https:\/\/www.xin-flying.com\/how-to-make-uv-dtf-cup-wraps\/\">Comment r\u00e9aliser des habillages de tasses en DTF UV<\/a>.<\/p>\n\n\n\n<h3 class=\"wp-block-heading\">Step 5: Clean the Surface, Burnish, and Transfer<\/h3>\n\n\n\n<p class=\"wp-block-paragraph\">Wipe the target hard surface with isopropyl alcohol or soapy water and let it dry completely. Dust, skin oils, or factory residue will prevent the adhesive from gripping.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Before peeling the backing, rub firmly across the face of the decal 2 to 4 times with the padded edge of a squeegee so the carrier grabs every small detail. Peel the A backing away slowly while watching that all fine elements stay on Film B. Position the decal on the item\u2014center-out for small stickers, or rolling from one side to the other on larger decals\u2014burnish firmly across all raised edges, and peel the B carrier back slowly at a low angle. Our <a href=\"https:\/\/www.xin-flying.com\/how-to-apply-uv-dtf-cup-wraps\/\">step-by-step guide to applying UV DTF cup wraps<\/a> covers alignment and bubble control in detail.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">How to Verify Printer Claims Before You Buy or Promise a Job<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Do not assume a printer&#8217;s maximum embossing height applies to A\/B film transfers.<\/strong> Several desktop and multi-function UV printers advertise impressive relief figures\u2014such as 5 mm or 7 mm 3D textures\u2014alongside UV DTF sticker capability. When you read the product pages closely, those height numbers are either tied to direct flatbed printing on rigid blanks or listed as a general machine specification without stating the printing path, while the UV DTF film sections describe glossy, water-resistant decals.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Similarly, a specification table that lists <code>CMJN + W + V<\/code> confirms that the machine has a varnish channel. It does not tell you how many varnish layers the RIP can stack on film, how long a multi-layer pass takes, or whether the laminated B film will still release cleanly over that height.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Before buying a machine or quoting a customer on a specific raised effect, ask the supplier four concrete questions:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Was the sample printed directly on the object or transferred via A\/B film?<\/strong> Ask to see the unapplied laminated A\/B transfer as well as the finished item.<\/li>\n\n\n\n<li><strong>Which exact model, ink type, and RIP setting produced that sample?<\/strong> Confirm whether it used standard UV ink, ultra-soft UV ink, or a special textile TPU system.<\/li>\n\n\n\n<li><strong>What was the actual print speed in that raised mode?<\/strong> Multi-pass varnish or structural layering runs slower than standard production modes.<\/li>\n\n\n\n<li><strong>How do fine lines and small text behave on the same sheet?<\/strong> Heavy varnish build can bridge narrow gaps or cause tiny letters to lift with the carrier film.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Sample Check Table: Test Artwork, On-Film Check, and Applied Result<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Never judge a 3D UV DTF sticker solely by how it looks on the uncut film.<\/strong> A transfer only succeeds when the raised texture, fine details, and edges survive lamination and bond cleanly to the customer&#8217;s actual product.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Build one test file that combines the hardest elements from your real orders: a solid logo block, a raised spot-varnish highlight, sharp corners, and fine text or thin lines. Print, laminate, and apply that sample to the exact cup, bottle, or container you plan to sell, then log the result against this table.<\/p>\n\n\n\n<figure class=\"wp-block-table\"><table><thead><tr><th>What the order needs<\/th><th>What you see on Film A &amp; after Film B lamination<\/th><th>What stays on the item after transfer<\/th><th>What fails<\/th><th>Where to check or adjust next<\/th><\/tr><\/thead><tbody><tr><td><strong>Noticeable gloss and tactile relief<\/strong><\/td><td>Varnish zone looks clear, smooth, and slightly raised under Film B<\/td><td>Finger feels a distinct, smooth step over the varnished elements<\/td><td>Surface looks dull, rough, or flat<\/td><td>Check varnish nozzle health, RIP varnish percentage\/passes, and UV curing strength<\/td><\/tr><tr><td><strong>Clean color edges with no white halo<\/strong><\/td><td>CMYK covers the white base evenly on the film<\/td><td>No white rim shows around dark letters or borders on the product<\/td><td>White edge peeks out on one or all sides<\/td><td>Increase white choke in the RIP; check bidirectional alignment and film feed stability<\/td><\/tr><tr><td><strong>Fine lines and tiny isolated text stay intact<\/strong><\/td><td>All small characters sit cleanly on Film A with adhesive coverage<\/td><td>Every letter transfers to the item and stays down when Film B is peeled<\/td><td>Small dots stay on Film A, or thin lines chip when peeling Film B<\/td><td>Burnish harder before and after placing; peel slower; reduce varnish thickness on tiny text<\/td><\/tr><tr><td><strong>No silvering or air pockets around raised steps<\/strong><\/td><td>Film B hugs the edge of the ink stack without a wide silver halo<\/td><td>Edges sit tight against the substrate with no trapped air<\/td><td>Bubbles or silver gaps outline the raised logo<\/td><td>Adjust laminator pressure\/temperature per film instructions; avoid over-building steep ink walls<\/td><\/tr><tr><td><strong>Firm edge hold on curved or smooth surfaces<\/strong><\/td><td>Decal bends smoothly with the carrier without cracking<\/td><td>Edges stay flat after 24 hours on the actual curve<\/td><td>Corners lift on a tapered tumbler or tight radius<\/td><td>Re-check surface cleaning; match ink flexibility to the curve; keep heavy build off compound curves<\/td><\/tr><tr><td><strong>Scratch-resistant cured finish<\/strong><\/td><td>Ink feels fully cured, not tacky or oily prior to lamination<\/td><td>Normal handling and fingernail rub do not smear or flake the gloss<\/td><td>Varnish smears, cracks, or peels away from the color layer<\/td><td>Check UV lamp output, print speed vs. cure time, and ink compatibility<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n<figure class=\"wp-block-image size-large\"><img decoding=\"async\" width=\"1024\" height=\"576\" src=\"https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/3d-uv-dtf-sample-inspection-stages-1024x576.webp\" alt=\"Three-stage quality check for 3D UV DTF stickers: printed on Film A, laminated with Film B, and applied onto a curved tumbler\" class=\"wp-image-15683\" srcset=\"https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/3d-uv-dtf-sample-inspection-stages-1024x576.webp 1024w, https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/3d-uv-dtf-sample-inspection-stages-300x169.webp 300w, https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/3d-uv-dtf-sample-inspection-stages-768x432.webp 768w, https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/3d-uv-dtf-sample-inspection-stages-1536x864.webp 1536w, https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/3d-uv-dtf-sample-inspection-stages-18x10.webp 18w, https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/3d-uv-dtf-sample-inspection-stages.webp 1672w\" sizes=\"(max-width: 1024px) 100vw, 1024px\" \/><\/figure>\n\n\n\n<p class=\"wp-block-paragraph\">Record visual appearance, tactile feel, and adhesion separately. A sample that looks glossy on the table but lifts along a tumbler curve after a few hours is an adhesion or flexibility mismatch, not a varnish failure. Only set a millimeter height target if the customer&#8217;s contract requires it and you have an agreed way to measure it on the finished part.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Surface Limits, Care, and What Standard UV DTF Cannot Do<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Standard A\/B film UV DTF decals are built for clean, non-porous, rigid or semi-rigid surfaces.<\/strong> Good candidates include glass bottles, coated or stainless steel tumblers, ceramic mugs, acrylic signs, smooth rigid plastics, and sealed wood.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">Avoid applying standard hard-surface UV DTF transfers to these materials:<\/p>\n\n\n\n<ul class=\"wp-block-list\">\n<li><strong>Silicone and low-surface-energy plastics:<\/strong> The adhesive cannot form a lasting bond and often lifts within hours.<\/li>\n\n\n\n<li><strong>Soft rubber and flexible TPU cases:<\/strong> Repeated bending breaks the bond between the cured ink stack and the surface.<\/li>\n\n\n\n<li><strong>Unsealed wood, rough stone, or heavy textures:<\/strong> Peaks and valleys prevent full adhesive contact.<\/li>\n\n\n\n<li><strong>Tight compound curves:<\/strong> Gentle cylinder tapers work well, but sphere-like curves force the film to wrinkle and lift.<\/li>\n\n\n\n<li><strong>Everyday washable apparel:<\/strong> Standard A\/B film decals crack and peel in the laundry. If an order calls for raised, embroidery-style patches on hats, hoodies, or canvas bags, use a dedicated textile process\u2014see our <a href=\"https:\/\/www.xin-flying.com\/uv-printer-machine\/tech-solutions\/3d-embroidery\/\">3D embroidery UV printing solution<\/a> for how specialty fabric workflows differ.<\/li>\n<\/ul>\n\n\n\n<p class=\"wp-block-paragraph\"><strong>Care and durability boundaries.<\/strong> Cured UV DTF decals handle water and normal hand-washing well. However, high heat and water jets inside a dishwasher weaken the adhesive over time, so recommend gentle hand-washing for decorated drinkware. Do not rely on placing a finished cup in sunlight or under a UV lamp for 30 to 60 seconds after transfer to fix poor adhesion; once transferred, bond strength depends on surface prep and the A\/B film&#8217;s pressure-sensitive adhesive. Finally, check the ink and film safety data sheets before making any claims about indirect or direct food contact.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Foire aux questions<\/h2>\n\n\n\n<div class=\"schema-faq wp-block-yoast-faq-block\"><div class=\"schema-faq-section\" id=\"faq-question-1794282347634\"><strong class=\"schema-faq-question\">Est-ce que tous les autocollants DTF UV sont en 3D ?<\/strong> <p class=\"schema-faq-answer\">La plupart des autocollants DTF UV pr\u00e9sentent un relief l\u00e9ger et une texture agr\u00e9able au toucher par rapport aux autocollants en vinyle plats, car les couches durcies de blanc, de couleur et de vernis reposent directement sur la surface, sans film de support. L'intensit\u00e9 de ce relief d\u00e9pend des param\u00e8tres de la couche de vernis et de l'\u00e9paisseur d'encre prises en charge par l'imprimante et le RIP.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1794282360812\"><strong class=\"schema-faq-question\">Est-ce l'encre blanche ou le vernis qui cr\u00e9e l'effet 3D en relief sur les autocollants pour surfaces dures ?<\/strong> <p class=\"schema-faq-answer\">Sur les d\u00e9calcomanies standard en film A\/B \u00e0 surface rigide, le vernis UV transparent constitue la couche principale utilis\u00e9e pour apporter de la brillance et un relief tactile localis\u00e9, tandis que l'encre blanche assure l'opacit\u00e9 sous les couleurs CMJN. L'encre blanche structurelle \u00e0 fort pouvoir couvrant est principalement utilis\u00e9e dans les processus de fabrication sp\u00e9cialis\u00e9s de badges textiles souples ou dans l'impression en relief directe sur objet.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1794282367293\"><strong class=\"schema-faq-question\">Puis-je r\u00e9aliser des autocollants 3D UV DTF avec une imprimante jet d'encre classique ou une machine Cricut ?<\/strong> <p class=\"schema-faq-answer\">Non. Le processus n\u00e9cessite une imprimante UV \u00e9quip\u00e9e d'encres durcissables aux UV (y compris des canaux pour le blanc et le vernis) et d'une lampe de s\u00e9chage UV pour solidifier les couches d'encre sur le film A, ainsi qu'un laminage avec le film B. Une imprimante \u00e0 jet d'encre standard ne peut ni projeter ni durcir de l'encre UV, mais aucune machine de d\u00e9coupe n'est n\u00e9cessaire car les transferts DTF UV ne n\u00e9cessitent pas d'\u00e9chenillage.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1794282375551\"><strong class=\"schema-faq-question\">Pourquoi les lignes fines s'\u00e9caillent-elles ou se d\u00e9collent-elles lorsqu'on d\u00e9colle un transfert DTF UV en relief ?<\/strong> <p class=\"schema-faq-answer\">Les lignes tr\u00e8s fines et les minuscules points isol\u00e9s offrent une surface d'adh\u00e9rence tr\u00e8s r\u00e9duite, et une couche de vernis trop \u00e9paisse peut les rendre rigides. Si elles restent sur le film A ou se d\u00e9collent avec le film B, lissez le d\u00e9calque plus fermement avant et pendant l'application, retirez le support lentement en maintenant un angle plat, et r\u00e9duisez l'\u00e9paisseur du vernis sur les micro-textures dans votre RIP.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1794282379896\"><strong class=\"schema-faq-question\">Les autocollants 3D UV DTF peuvent-ils passer au lave-vaisselle ou \u00eatre appos\u00e9s sur des t-shirts ?<\/strong> <p class=\"schema-faq-answer\">Les d\u00e9calcomanies DTF UV standard pour surfaces dures r\u00e9sistent \u00e0 l'eau lors d'un lavage \u00e0 la main, mais la chaleur et la vapeur du lave-vaisselle peuvent alt\u00e9rer l'adh\u00e9sif et provoquer un d\u00e9collement. Elles ne sont pas non plus destin\u00e9es aux v\u00eatements lavables ; pour les v\u00eatements, utilisez des transferts DTF textiles ou un syst\u00e8me d\u00e9di\u00e9 aux \u00e9cussons souples pour v\u00eatements.<\/p> <\/div> <div class=\"schema-faq-section\" id=\"faq-question-1794282394276\"><strong class=\"schema-faq-question\">Dois-je faire durcir les autocollants DTF UV \u00e0 l'aide d'une lampe UV apr\u00e8s les avoir pos\u00e9s ?<\/strong> <p class=\"schema-faq-answer\">Dans un processus DTF UV standard, l'encre UV est durcie directement sur l'imprimante avant le laminage du film B. Le transfert du d\u00e9calque sur l'objet s'effectue \u00e0 l'aide d'un adh\u00e9sif sensible \u00e0 la pression ; il n'est donc g\u00e9n\u00e9ralement pas n\u00e9cessaire de proc\u00e9der \u00e0 un durcissement ult\u00e9rieur au soleil, sauf indication contraire de la part de votre fournisseur d'encre et de film.<\/p> <\/div> <\/div>\n\n\n\n<h2 class=\"wp-block-heading\">Test Your Artwork on a Matched UV DTF Setup<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Start by building a single test file that includes your smallest text, a solid color block, and the exact spot-varnish areas your customer wants. Run that file through the three-stage check table on your actual product blank before promising a specific relief height or turnaround time.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\">If you are comparing equipment to produce raised-varnish decals, cup wraps, or specialty transfers in-house, explore our <a href=\"https:\/\/www.xin-flying.com\/uv-printer-machine\/uv-dtf-printer-machine\/\">Imprimantes UV DTF<\/a>. Share your target items, artwork sizes, and expected weekly volume on that page, and our team will recommend a matched printer, ink, and A\/B film configuration and provide a custom quote for your setup.<\/p>\n\n\n\n<p class=\"wp-block-paragraph\"><\/p>","protected":false},"excerpt":{"rendered":"<p>To make a hard-surface 3D UV DTF sticker, print white ink, CMYK color, and clear UV varnish onto adhesive Film A, cure the ink with UV light during printing, laminate transfer Film B on top, and press the decal onto a clean rigid item. The raised feel on a standard UV DTF decal comes from [&hellip;]<\/p>\n","protected":false},"author":5,"featured_media":15685,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"site-sidebar-layout":"default","site-content-layout":"","ast-site-content-layout":"default","site-content-style":"default","site-sidebar-style":"default","ast-global-header-display":"","ast-banner-title-visibility":"","ast-main-header-display":"","ast-hfb-above-header-display":"","ast-hfb-below-header-display":"","ast-hfb-mobile-header-display":"","site-post-title":"","ast-breadcrumbs-content":"","ast-featured-img":"","footer-sml-layout":"","ast-disable-related-posts":"","theme-transparent-header-meta":"","adv-header-id-meta":"","stick-header-meta":"","header-above-stick-meta":"","header-main-stick-meta":"","header-below-stick-meta":"","astra-migrate-meta-layouts":"set","ast-page-background-enabled":"default","ast-page-background-meta":{"desktop":{"background-color":"var(--ast-global-color-4)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"ast-content-background-meta":{"desktop":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"tablet":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""},"mobile":{"background-color":"var(--ast-global-color-5)","background-image":"","background-repeat":"repeat","background-position":"center center","background-size":"auto","background-attachment":"scroll","background-type":"","background-media":"","overlay-type":"","overlay-color":"","overlay-opacity":"","overlay-gradient":""}},"footnotes":""},"categories":[58],"tags":[57],"class_list":["post-15679","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-blogs","tag-uv-dtf-printer"],"acf":[],"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.1 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>How to Make 3D UV DTF Stickers: Layers, Workflow, and Sample Checks<\/title>\n<meta name=\"description\" content=\"Learn how to make 3D UV DTF stickers for hard surfaces, what creates the raised varnish feel, how to avoid mixed-up 3D specs, and how to inspect transfer samples.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.xin-flying.com\/fr\/comment-realiser-des-autocollants-3d-uv-dtf\/\" \/>\n<meta property=\"og:locale\" content=\"fr_FR\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"How to Make 3D UV DTF Stickers: Layers, Workflow, and Sample Checks\" \/>\n<meta property=\"og:description\" content=\"Learn how to make 3D UV DTF stickers for hard surfaces, what creates the raised varnish feel, how to avoid mixed-up 3D specs, and how to inspect transfer samples.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.xin-flying.com\/fr\/comment-realiser-des-autocollants-3d-uv-dtf\/\" \/>\n<meta property=\"og:site_name\" content=\"XINFLYING\" \/>\n<meta property=\"article:published_time\" content=\"2026-11-10T10:00:00+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/how-to-make-3d-uv-dtf-stickers.webp\" \/>\n\t<meta property=\"og:image:width\" content=\"1672\" \/>\n\t<meta property=\"og:image:height\" content=\"941\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/webp\" \/>\n<meta name=\"author\" content=\"Chen, David\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"\u00c9crit par\" \/>\n\t<meta name=\"twitter:data1\" content=\"Chen, David\" \/>\n\t<meta name=\"twitter:label2\" content=\"Dur\u00e9e de lecture estim\u00e9e\" \/>\n\t<meta name=\"twitter:data2\" content=\"15 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"Article\",\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/\"},\"author\":{\"name\":\"Chen, David\",\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/#\\\/schema\\\/person\\\/dcde6b56673b3761f6017b60dfdbf7cd\"},\"headline\":\"How to Make 3D UV DTF Stickers: Layers, Workflow, and Sample Checks\",\"datePublished\":\"2026-11-10T10:00:00+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/\"},\"wordCount\":3147,\"commentCount\":0,\"publisher\":{\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.xin-flying.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/how-to-make-3d-uv-dtf-stickers.webp\",\"keywords\":[\"UV DTF Printer\"],\"articleSection\":[\"Blogs\"],\"inLanguage\":\"fr-FR\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#respond\"]}]},{\"@type\":[\"WebPage\",\"FAQPage\"],\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/\",\"url\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/\",\"name\":\"How to Make 3D UV DTF Stickers: Layers, Workflow, and Sample Checks\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/www.xin-flying.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/how-to-make-3d-uv-dtf-stickers.webp\",\"datePublished\":\"2026-11-10T10:00:00+00:00\",\"description\":\"Learn how to make 3D UV DTF stickers for hard surfaces, what creates the raised varnish feel, how to avoid mixed-up 3D specs, and how to inspect transfer samples.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#breadcrumb\"},\"mainEntity\":[{\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#faq-question-1794282347634\"},{\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#faq-question-1794282360812\"},{\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#faq-question-1794282367293\"},{\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#faq-question-1794282375551\"},{\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#faq-question-1794282379896\"},{\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#faq-question-1794282394276\"}],\"inLanguage\":\"fr-FR\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#primaryimage\",\"url\":\"https:\\\/\\\/www.xin-flying.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/how-to-make-3d-uv-dtf-stickers.webp\",\"contentUrl\":\"https:\\\/\\\/www.xin-flying.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/how-to-make-3d-uv-dtf-stickers.webp\",\"width\":1672,\"height\":941,\"caption\":\"how to make 3d uv dtf stickers\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.xin-flying.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Blogs\",\"item\":\"https:\\\/\\\/www.xin-flying.com\\\/category\\\/blogs\\\/\"},{\"@type\":\"ListItem\",\"position\":3,\"name\":\"How to Make 3D UV DTF Stickers: Layers, Workflow, and Sample Checks\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/#website\",\"url\":\"https:\\\/\\\/www.xin-flying.com\\\/\",\"name\":\"XINFLYING\",\"description\":\"DTF Printer &amp; UV Printer Machine Manufacturer\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/#organization\"},\"alternateName\":\"Xin Flying\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.xin-flying.com\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"fr-FR\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/#organization\",\"name\":\"Guangzhou Xin Flying Digital Technology Co.,Ltd\",\"alternateName\":\"XINFLYING\",\"url\":\"https:\\\/\\\/www.xin-flying.com\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.xin-flying.com\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/XINFLYING-logo-1.webp\",\"contentUrl\":\"https:\\\/\\\/www.xin-flying.com\\\/wp-content\\\/uploads\\\/2026\\\/07\\\/XINFLYING-logo-1.webp\",\"width\":800,\"height\":800,\"caption\":\"Guangzhou Xin Flying Digital Technology Co.,Ltd\"},\"image\":{\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/#\\\/schema\\\/logo\\\/image\\\/\"}},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/#\\\/schema\\\/person\\\/dcde6b56673b3761f6017b60dfdbf7cd\",\"name\":\"Chen, David\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"fr-FR\",\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/wp-content\\\/litespeed\\\/avatar\\\/5268454ac475e000f110fae4685cc64e.jpg?ver=1793766420\",\"url\":\"https:\\\/\\\/www.xin-flying.com\\\/wp-content\\\/litespeed\\\/avatar\\\/5268454ac475e000f110fae4685cc64e.jpg?ver=1793766420\",\"contentUrl\":\"https:\\\/\\\/www.xin-flying.com\\\/wp-content\\\/litespeed\\\/avatar\\\/5268454ac475e000f110fae4685cc64e.jpg?ver=1793766420\",\"caption\":\"Chen, David\"}},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#faq-question-1794282347634\",\"position\":1,\"url\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#faq-question-1794282347634\",\"name\":\"Are all UV DTF stickers 3D?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Most UV DTF stickers have a slightly raised, tactile feel compared with flat vinyl stickers because the cured white, color, and varnish layers sit directly on the surface without a background film. How pronounced that relief feels depends on the varnish layer settings and ink build supported by the printer and RIP.\",\"inLanguage\":\"fr-FR\"},\"inLanguage\":\"fr-FR\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#faq-question-1794282360812\",\"position\":2,\"url\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#faq-question-1794282360812\",\"name\":\"Does white ink or varnish create the raised 3D effect on hard-surface stickers?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"On standard hard-surface A\\\/B film decals, clear UV varnish is the main layer used to add gloss and localized tactile height, while white ink provides opacity under the CMYK colors. High-build structural white ink is mainly used in specialized flexible textile badge workflows or direct-to-object relief printing.\",\"inLanguage\":\"fr-FR\"},\"inLanguage\":\"fr-FR\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#faq-question-1794282367293\",\"position\":3,\"url\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#faq-question-1794282367293\",\"name\":\"Can I make 3D UV DTF stickers with a regular inkjet printer or Cricut?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"No. The process requires a UV printer with UV-curable inks (including white and varnish channels) and a UV curing lamp to solidify the ink layers on Film A, plus lamination with Film B. A standard inkjet printer cannot jet or cure UV ink, though a cutting machine is not needed because UV DTF transfers do not require weeding.\",\"inLanguage\":\"fr-FR\"},\"inLanguage\":\"fr-FR\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#faq-question-1794282375551\",\"position\":4,\"url\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#faq-question-1794282375551\",\"name\":\"Why do fine lines chip or lift when peeling a raised UV DTF transfer?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Very thin lines and tiny isolated dots carry very little adhesive area, and a heavy varnish cap can make them stiff. If they stay on Film A or lift with Film B, squeegee the decal more firmly before and during application, peel the carrier slowly at a flat angle, and reduce the varnish build on micro-text in your RIP.\",\"inLanguage\":\"fr-FR\"},\"inLanguage\":\"fr-FR\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#faq-question-1794282379896\",\"position\":5,\"url\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#faq-question-1794282379896\",\"name\":\"Can 3D UV DTF stickers go in the dishwasher or on T-shirts?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"Standard hard-surface UV DTF decals are waterproof for hand-washing, but dishwasher heat and steam can degrade the adhesive and cause peeling. They are also not meant for washable clothing; use textile DTF transfers or a dedicated flexible apparel badge system for garments.\",\"inLanguage\":\"fr-FR\"},\"inLanguage\":\"fr-FR\"},{\"@type\":\"Question\",\"@id\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#faq-question-1794282394276\",\"position\":6,\"url\":\"https:\\\/\\\/www.xin-flying.com\\\/how-to-make-3d-uv-dtf-stickers\\\/#faq-question-1794282394276\",\"name\":\"Do I need to cure UV DTF stickers with a UV light after applying them?\",\"answerCount\":1,\"acceptedAnswer\":{\"@type\":\"Answer\",\"text\":\"In a standard UV DTF workflow, the UV ink is cured onboard the printer before Film B is laminated. Pressing the decal onto the item is a pressure-sensitive adhesive transfer, so post-curing in the sun is normally unnecessary unless your specific ink and film supplier instructs otherwise.\",\"inLanguage\":\"fr-FR\"},\"inLanguage\":\"fr-FR\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Comment r\u00e9aliser des autocollants 3D UV DTF : calques, processus de travail et contr\u00f4les des \u00e9chantillons","description":"D\u00e9couvrez comment r\u00e9aliser des autocollants 3D UV DTF pour surfaces dures, ce qui donne cet effet de vernis en relief, comment \u00e9viter les erreurs dans les sp\u00e9cifications 3D et comment contr\u00f4ler les \u00e9chantillons de transfert.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.xin-flying.com\/fr\/comment-realiser-des-autocollants-3d-uv-dtf\/","og_locale":"fr_FR","og_type":"article","og_title":"How to Make 3D UV DTF Stickers: Layers, Workflow, and Sample Checks","og_description":"Learn how to make 3D UV DTF stickers for hard surfaces, what creates the raised varnish feel, how to avoid mixed-up 3D specs, and how to inspect transfer samples.","og_url":"https:\/\/www.xin-flying.com\/fr\/comment-realiser-des-autocollants-3d-uv-dtf\/","og_site_name":"XINFLYING","article_published_time":"2026-11-10T10:00:00+00:00","og_image":[{"width":1672,"height":941,"url":"https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/how-to-make-3d-uv-dtf-stickers.webp","type":"image\/webp"}],"author":"Chen, David","twitter_card":"summary_large_image","twitter_misc":{"\u00c9crit par":"Chen, David","Dur\u00e9e de lecture estim\u00e9e":"15 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"Article","@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#article","isPartOf":{"@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/"},"author":{"name":"Chen, David","@id":"https:\/\/www.xin-flying.com\/#\/schema\/person\/dcde6b56673b3761f6017b60dfdbf7cd"},"headline":"How to Make 3D UV DTF Stickers: Layers, Workflow, and Sample Checks","datePublished":"2026-11-10T10:00:00+00:00","mainEntityOfPage":{"@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/"},"wordCount":3147,"commentCount":0,"publisher":{"@id":"https:\/\/www.xin-flying.com\/#organization"},"image":{"@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#primaryimage"},"thumbnailUrl":"https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/how-to-make-3d-uv-dtf-stickers.webp","keywords":["UV DTF Printer"],"articleSection":["Blogs"],"inLanguage":"fr-FR","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#respond"]}]},{"@type":["WebPage","FAQPage"],"@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/","url":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/","name":"Comment r\u00e9aliser des autocollants 3D UV DTF : calques, processus de travail et contr\u00f4les des \u00e9chantillons","isPartOf":{"@id":"https:\/\/www.xin-flying.com\/#website"},"primaryImageOfPage":{"@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#primaryimage"},"image":{"@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#primaryimage"},"thumbnailUrl":"https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/how-to-make-3d-uv-dtf-stickers.webp","datePublished":"2026-11-10T10:00:00+00:00","description":"D\u00e9couvrez comment r\u00e9aliser des autocollants 3D UV DTF pour surfaces dures, ce qui donne cet effet de vernis en relief, comment \u00e9viter les erreurs dans les sp\u00e9cifications 3D et comment contr\u00f4ler les \u00e9chantillons de transfert.","breadcrumb":{"@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#breadcrumb"},"mainEntity":[{"@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#faq-question-1794282347634"},{"@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#faq-question-1794282360812"},{"@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#faq-question-1794282367293"},{"@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#faq-question-1794282375551"},{"@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#faq-question-1794282379896"},{"@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#faq-question-1794282394276"}],"inLanguage":"fr-FR","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/"]}]},{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#primaryimage","url":"https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/how-to-make-3d-uv-dtf-stickers.webp","contentUrl":"https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/11\/how-to-make-3d-uv-dtf-stickers.webp","width":1672,"height":941,"caption":"how to make 3d uv dtf stickers"},{"@type":"BreadcrumbList","@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.xin-flying.com\/"},{"@type":"ListItem","position":2,"name":"Blogs","item":"https:\/\/www.xin-flying.com\/category\/blogs\/"},{"@type":"ListItem","position":3,"name":"How to Make 3D UV DTF Stickers: Layers, Workflow, and Sample Checks"}]},{"@type":"WebSite","@id":"https:\/\/www.xin-flying.com\/#website","url":"https:\/\/www.xin-flying.com\/","name":"XINFLYING","description":"Fabricant d'imprimantes DTF et d'imprimantes UV","publisher":{"@id":"https:\/\/www.xin-flying.com\/#organization"},"alternateName":"Xin Flying","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.xin-flying.com\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"fr-FR"},{"@type":"Organization","@id":"https:\/\/www.xin-flying.com\/#organization","name":"Guangzhou Xin Flying Digital Technology Co., Ltd.","alternateName":"XINFLYING","url":"https:\/\/www.xin-flying.com\/","logo":{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/www.xin-flying.com\/#\/schema\/logo\/image\/","url":"https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/07\/XINFLYING-logo-1.webp","contentUrl":"https:\/\/www.xin-flying.com\/wp-content\/uploads\/2026\/07\/XINFLYING-logo-1.webp","width":800,"height":800,"caption":"Guangzhou Xin Flying Digital Technology Co.,Ltd"},"image":{"@id":"https:\/\/www.xin-flying.com\/#\/schema\/logo\/image\/"}},{"@type":"Person","@id":"https:\/\/www.xin-flying.com\/#\/schema\/person\/dcde6b56673b3761f6017b60dfdbf7cd","name":"Chen, David","image":{"@type":"ImageObject","inLanguage":"fr-FR","@id":"https:\/\/www.xin-flying.com\/wp-content\/litespeed\/avatar\/5268454ac475e000f110fae4685cc64e.jpg?ver=1793766420","url":"https:\/\/www.xin-flying.com\/wp-content\/litespeed\/avatar\/5268454ac475e000f110fae4685cc64e.jpg?ver=1793766420","contentUrl":"https:\/\/www.xin-flying.com\/wp-content\/litespeed\/avatar\/5268454ac475e000f110fae4685cc64e.jpg?ver=1793766420","caption":"Chen, David"}},{"@type":"Question","@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#faq-question-1794282347634","position":1,"url":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#faq-question-1794282347634","name":"Est-ce que tous les autocollants DTF UV sont en 3D ?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Most UV DTF stickers have a slightly raised, tactile feel compared with flat vinyl stickers because the cured white, color, and varnish layers sit directly on the surface without a background film. How pronounced that relief feels depends on the varnish layer settings and ink build supported by the printer and RIP.","inLanguage":"fr-FR"},"inLanguage":"fr-FR"},{"@type":"Question","@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#faq-question-1794282360812","position":2,"url":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#faq-question-1794282360812","name":"Est-ce l'encre blanche ou le vernis qui cr\u00e9e l'effet 3D en relief sur les autocollants pour surfaces dures ?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"On standard hard-surface A\/B film decals, clear UV varnish is the main layer used to add gloss and localized tactile height, while white ink provides opacity under the CMYK colors. High-build structural white ink is mainly used in specialized flexible textile badge workflows or direct-to-object relief printing.","inLanguage":"fr-FR"},"inLanguage":"fr-FR"},{"@type":"Question","@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#faq-question-1794282367293","position":3,"url":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#faq-question-1794282367293","name":"Puis-je r\u00e9aliser des autocollants 3D UV DTF avec une imprimante jet d'encre classique ou une machine Cricut ?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"No. The process requires a UV printer with UV-curable inks (including white and varnish channels) and a UV curing lamp to solidify the ink layers on Film A, plus lamination with Film B. A standard inkjet printer cannot jet or cure UV ink, though a cutting machine is not needed because UV DTF transfers do not require weeding.","inLanguage":"fr-FR"},"inLanguage":"fr-FR"},{"@type":"Question","@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#faq-question-1794282375551","position":4,"url":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#faq-question-1794282375551","name":"Pourquoi les lignes fines s'\u00e9caillent-elles ou se d\u00e9collent-elles lorsqu'on d\u00e9colle un transfert DTF UV en relief ?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Very thin lines and tiny isolated dots carry very little adhesive area, and a heavy varnish cap can make them stiff. If they stay on Film A or lift with Film B, squeegee the decal more firmly before and during application, peel the carrier slowly at a flat angle, and reduce the varnish build on micro-text in your RIP.","inLanguage":"fr-FR"},"inLanguage":"fr-FR"},{"@type":"Question","@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#faq-question-1794282379896","position":5,"url":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#faq-question-1794282379896","name":"Les autocollants 3D UV DTF peuvent-ils passer au lave-vaisselle ou \u00eatre appos\u00e9s sur des t-shirts ?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"Standard hard-surface UV DTF decals are waterproof for hand-washing, but dishwasher heat and steam can degrade the adhesive and cause peeling. They are also not meant for washable clothing; use textile DTF transfers or a dedicated flexible apparel badge system for garments.","inLanguage":"fr-FR"},"inLanguage":"fr-FR"},{"@type":"Question","@id":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#faq-question-1794282394276","position":6,"url":"https:\/\/www.xin-flying.com\/how-to-make-3d-uv-dtf-stickers\/#faq-question-1794282394276","name":"Dois-je faire durcir les autocollants DTF UV \u00e0 l'aide d'une lampe UV apr\u00e8s les avoir pos\u00e9s ?","answerCount":1,"acceptedAnswer":{"@type":"Answer","text":"In a standard UV DTF workflow, the UV ink is cured onboard the printer before Film B is laminated. Pressing the decal onto the item is a pressure-sensitive adhesive transfer, so post-curing in the sun is normally unnecessary unless your specific ink and film supplier instructs otherwise.","inLanguage":"fr-FR"},"inLanguage":"fr-FR"}]}},"_links":{"self":[{"href":"https:\/\/www.xin-flying.com\/fr\/wp-json\/wp\/v2\/posts\/15679","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.xin-flying.com\/fr\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.xin-flying.com\/fr\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.xin-flying.com\/fr\/wp-json\/wp\/v2\/users\/5"}],"replies":[{"embeddable":true,"href":"https:\/\/www.xin-flying.com\/fr\/wp-json\/wp\/v2\/comments?post=15679"}],"version-history":[{"count":3,"href":"https:\/\/www.xin-flying.com\/fr\/wp-json\/wp\/v2\/posts\/15679\/revisions"}],"predecessor-version":[{"id":15690,"href":"https:\/\/www.xin-flying.com\/fr\/wp-json\/wp\/v2\/posts\/15679\/revisions\/15690"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.xin-flying.com\/fr\/wp-json\/wp\/v2\/media\/15685"}],"wp:attachment":[{"href":"https:\/\/www.xin-flying.com\/fr\/wp-json\/wp\/v2\/media?parent=15679"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.xin-flying.com\/fr\/wp-json\/wp\/v2\/categories?post=15679"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.xin-flying.com\/fr\/wp-json\/wp\/v2\/tags?post=15679"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}