{"id":15679,"date":"2026-11-10T18:00:00","date_gmt":"2026-11-10T10:00:00","guid":{"rendered":"https:\/\/www.xin-flying.com\/?p=15679"},"modified":"2026-11-10T13:48:18","modified_gmt":"2026-11-10T05:48:18","slug":"como-hacer-pegatinas-3d-uv-dtf","status":"publish","type":"post","link":"https:\/\/www.xin-flying.com\/es\/how-to-make-3d-uv-dtf-stickers\/","title":{"rendered":"C\u00f3mo crear pegatinas 3D UV DTF: capas, flujo de trabajo y comprobaciones de muestras"},"content":{"rendered":"

To make a hard-surface 3D UV DTF sticker, print white ink, CMYK color, and clear UV varnish onto adhesive Film A, cure the ink with UV light during printing, laminate transfer Film B on top, and press the decal onto a clean rigid item. The raised feel on a standard UV DTF decal comes from the cured ink stack and the glossy varnish coat, not from a vinyl backing sheet.<\/p>\n\n\n\n

Before setting up a print job or buying equipment, check what kind of “3D” your order actually requires. Suppliers use the same phrase for slightly raised glossy tumbler decals, thick direct-to-object UV embossing, and heat-pressed 3D apparel badges. Each of those uses a different ink behavior, film or platen setup, and transfer method.<\/p>\n\n\n\n

First Clarify What “3D UV DTF Sticker” Means for Your Order<\/h2>\n\n\n\n

“3D UV DTF” is not a single standardized process.<\/strong> In online guides and product listings, the label covers four different production setups. Mixing them up leads shops to buy the wrong film, expect millimeter-tall relief on a curved cup wrap, or apply a rigid decal to a shirt.<\/p>\n\n\n\n

Match the customer’s sample or reference photo against the complete production system\u2014ink, film, adhesive, transfer method, and target surface\u2014using the table below.<\/p>\n\n\n\n

What people call “3D UV DTF”<\/th>Ink and layer build<\/th>Film or platform<\/th>How it transfers<\/th>Target surface<\/th><\/tr><\/thead>
Standard raised-varnish UV DTF decal (crystal label)<\/strong><\/td>UV-curable white underbase, CMYK color, and clear varnish for gloss and light tactile relief<\/td>UV DTF Film A (print side) laminated with Film B (carrier)<\/td>Cold pressure by hand or squeegee; peel carrier<\/td>Smooth hard goods: glass, metal, ceramic, acrylic, rigid plastic<\/td><\/tr>
Direct-to-object UV relief \/ embossing<\/strong><\/td>Repeated UV ink passes built directly on the item<\/td>Flatbed or rotary jig holding the object (no transfer film)<\/td>Not transferred; printed straight onto the product<\/td>Flat plaques, phone cases, magnets, coasters, cylinders<\/td><\/tr>
Flexible 3D raised apparel badge \/ faux embroidery<\/strong><\/td>High-build flexible white ink stacked for height, plus flexible CMYK and finish coat<\/td>Special textile transfer film and TPU hot-melt adhesive system<\/td>Contour cut and applied with a heat press<\/td>Apparel and fabric goods: hoodies, jerseys, caps, canvas bags<\/td><\/tr>
Marketing name on standard transfer stickers<\/strong><\/td>Standard CMYK + white + varnish UV DTF print<\/td>Standard A\/B film<\/td>Cold pressure and peel<\/td>Hard surfaces; “3D” simply describes the no-background, slightly raised look<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

This guide focuses on the first category: hard-surface UV DTF decals made with A\/B film.<\/strong> For a broader overview of the base technology, see our guide on what UV DTF printing is<\/a>. If your customer wants flexible transfers for shirts or hoodies, compare the two workflows in DTF vs. UV DTF printing<\/a>.<\/p>\n\n\n\n

What Gives a Hard-Surface UV DTF Sticker Its Raised Feel?<\/h2>\n\n\n\n

On a hard-surface UV DTF decal, the tactile effect comes from cured UV ink layers topped with clear varnish.<\/strong> Unlike vinyl stickers that sit on a flat PVC sheet, a UV DTF transfer leaves only the cured ink and adhesive on the object. When you run a finger across the finished decal, you feel the step from the bare surface up to the capped ink stack.<\/p>\n\n\n\n

Each ink layer has a distinct job in that stack:<\/p>\n\n\n\n